| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (130/202) > >> |
| PPRINT:
Just wanted to stop in and share that my controller is still rocking right along. Super pleased with this investment. I did want to share something strange I have had happen twice to me. I use both the original USB stick and several other PNY brand sticks. I removed all of the system config files from the original USB stick some time ago, but here recently I have had the control completely reboot and dump all home positions when I plug in the original stick that has nothing but .NC files on it. I am not sure how or why, but it is happening. I have not experienced this with the other sticks. My solution so far is to keep Benedikt's files on that USB at all times. Seems to be solid again. Anyone experience this? Or have an explanation of what I might have done wrong? Rob |
| efrench:
--- Quote from: John Stevenson on July 26, 2017, 09:57:14 AM ---Things move on very fast in this game. Go to CNC workshop. cn and search for abrsnd new controller called a CW40 Supports 257M of memory, 4 axis can handle tool changes and addresses some of the downsides of the DSV I have asked for a few PDF and will post it when I get it. Looks to be roughly the same price. --- End quote --- Is this the one you're talking about? The video is from 2012... |
| kwood94xj:
PPRINT: What OS are you using to view the files on the stick? Linux filesystems have several ways of hiding files and windows sometimes misses them. Have you tried a low level format of the drive? |
| PPRINT:
kwood...I am using windows 8.1. I have not tried any re-formatting of that thumb drive yet. To be honest I have no idea how. I'll do a little surfing of the net and see what I can find for a tutorial. Thanks for the suggestion. Rob |
| blades:
--- Quote from: efrench on July 26, 2017, 09:42:44 PM --- --- Quote from: John Stevenson on July 26, 2017, 09:57:14 AM ---Things move on very fast in this game. Go to CNC workshop. cn and search for abrsnd new controller called a CW40 Supports 257M of memory, 4 axis can handle tool changes and addresses some of the downsides of the DSV I have asked for a few PDF and will post it when I get it. Looks to be roughly the same price. --- End quote --- Is this the one you're talking about? The video is from 2012... --- End quote --- There's no WAY that controller can be anywhere near the same price range as the DDCSV1.1 |
| Navigation |
| Message Index |
| Next page |
| Previous page |