| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (116/202) > >> |
| Benedikt:
--- Quote from: old Zozo on May 08, 2017, 01:54:17 PM ---Rob, you are the other God of this forum :) (Pardon, No.1 is Benedikt) --- End quote --- Haha, thanks. I feel flattered :beer: --- Quote from: RotarySMP on May 09, 2017, 09:44:55 AM ---Is there a change log listing the overview of changes so far made to this controller? --- End quote --- Not officially. But here you go: - Added USB Keyboard / Keypad support - Translated the UI from Chinglish into proper English - Added USB serial drivers (if such an adapter is connected on boot, a root shell is spanwed automatically) - Added autostart script hooks (from USB and from internal flash) - Keep settings on firmware upgrade - Improved the file manager - Fixed issues in the underlying Linux file system - Added a new customizable splash screen I might have forgotten something, but these are the major changes of the original firmware. Most of our work has targeted a new open-source GPL rewrite of the software. We have rewritten the keypad driver and the FPGA driver. I have written many support utilities such as a FPGA debug utility, a NAND flash dumping utility, a NAND flash image editor and more. I have also written a Makefile to build SDL with PNG and TTF support and all their required dependencies, gnuddrescue and a userland framebuffer terminal. A full list of utilities can be found on our repositories: Mine: https://github.com/bmuessig?tab=repositories iocapa: https://github.com/iocapa?tab=repositories Here's a simplified roadmap: * FIX MY UNIT!!! * Finish keypad driver support * Write a small utility for controlling the internal buzzer * Write a replacement GUI application What has to be done concurrently is resume work on pdmotiond which is a full open source GPL reimplementation of the entire CNC motion stack. This will also handle the limit switches, emergency stop, different axis configurations, FPGA setup (steps per mm, etc.) and homing / probing. |
| PPRINT:
Benedikt, please let us know if your control is not repairable. I am willing to kick in to help fund a replacement to further the development of this control. Rob Sent from my SAMSUNG-SM-G900A using Tapatalk |
| Benedikt:
--- Quote from: PPRINT on May 09, 2017, 11:13:44 AM ---Benedikt, please let us know if your control is not repairable. I am willing to kick in to help fund a replacement to further the development of this control. Rob --- End quote --- This is a really kind offer :bugeye: I am trying everything to get the controller back to life, but if I fail, I would love to come back to your offer :thumbup: EDIT: I have just registered us a domain: http://pandora-cnc.eu/ which will now serve as the download address (replacing data.bmuessig.eu) and will contain all information and the credits. The site will also have, being a .eu, free whois protection... Thanks, Benedikt |
| johnsattuk:
--- Quote from: PPRINT on May 09, 2017, 11:13:44 AM ---Benedikt, please let us know if your control is not repairable. I am willing to kick in to help fund a replacement to further the development of this control. Rob --- End quote --- Will also help |
| antonio:
hi Benedikt. it seems that pandora configurator online page not work Inviato dal mio iPad utilizzando Tapatalk |
| Navigation |
| Message Index |
| Next page |
| Previous page |