| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (93/202) > >> |
| antonio:
Many many thanks jjae6. I don't have experiance with linux but only some conventionally and basic command/language as my previous school sutyed. In any case I understood what you meen.. is very clear. I will study better your comment. Also sorry for my english too. I would like to know if it possible to modify direct the slib.nc and put on my device without any damage on the firmware and just in case (if it not work) replace the original in any time. Many thanks again |
| Benedikt:
Thanks! I have mostly completed my modifications of the binary now and it works. I have gained control over the file manager and have simplified it. It is now also possible to detect if certain files are deleted or copied. I will use the copy function to rewrite gcode files. When you copy a file to its origin directory, it will be processed and the preprocessor that I am working on will rewrite the file. Also thanks jjae6 for your input. If you need a list of all controller settings including their descriptions, head over to http://bmuessig.eu/tools/pandora-configurator or take the machine readable version from http://bmuessig.eu/tools/pandora-configurator/lang_eng.json These are the values from the script that are prefixed with a # |
| maxx2000:
Hello friends. I would like to see the support of the G93 G94 in the controller, this allows using 5 axial cycles for 4 axial machining with a fixed 5 axis. :thumbup: |
| Benedikt:
--- Quote from: maxx2000 on March 09, 2017, 04:48:30 AM ---Hello friends. I would like to see the support of the G93 G94 in the controller, this allows using 5 axial cycles for 4 axial machining with a fixed 5 axis. :thumbup: --- End quote --- Hello maxx2000! Are you talking about the following commands? G93: Feed Rate Mode (Inverse Time Mode) G94: Feed Rate Mode (Units per Minute) Regards, Benedikt |
| maxx2000:
--- Quote from: Benedikt M. on March 10, 2017, 07:45:53 AM ---Are you talking about the following commands? G93: Feed Rate Mode (Inverse Time Mode) G94: Feed Rate Mode (Units per Minute) --- End quote --- Yes |
| Navigation |
| Message Index |
| Next page |
| Previous page |