DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (91/202) > >>

BrokenEye:
I think the home sequence is fixed at X,Y,Z,A, Antonio, not sure if a Macro could be written to do that, I'm still digging around in the code, so I dont know,sorry.

antonio:
Manu thanks BrokenEye
why my sequenze starting from z?
:lol:

Benedikt:

--- Quote from: antonio on March 05, 2017, 04:23:44 AM ---Manu thanks BrokenEye
why my sequenze starting from z?
:lol:

--- End quote ---
I recall reading it will back to a safe height before homing completely, but I may be corrected there.

antonio:
I've found this on the slib.nc

(G28 X Y Z A)
O9028
#1=#451
#2=#452
#3=#453
#4=#454
IF #450LT0 GOTO1
#5=#488
#6=#489
#7=#490
#8=#491
GOTO2
N1 #5=#1+#488
#6=#2+#489
#7=#3+#490
#8=#4+#491
N2 G90G00X#5Y#6Z#7A#8
IF#455EQ0GOTO3
IF#455EQ1GOTO4
IF#455EQ2GOTO5
IF#455EQ3GOTO6
IF#455EQ4GOTO7
IF#455EQ5GOTO8
IF#455EQ6GOTO9
N3 #9=-#800
#10=-#801
#11=-#802
#12=-#803
GOTO10
N4 #9=-#800-#804
#10=-#801-#805
#11=-#802-#806
#12=-#803-#807
GOTO10
N5 #9=-#800-#808
#10=-#801-#809
#11=-#802-#810
#12=-#803-#811
GOTO10
N6 #9=-#800-#812
#10=-#801-#813
#11=-#802-#814
#12=-#803-#815
GOTO10
N7 #9=-#800-#816
#10=-#801-#817
#11=-#802-#818
#12=-#803-#819
GOTO10
N8 #9=-#800-#820
#10=-#801-#821
#11=-#802-#822
#12=-#803-#823
GOTO10
N9 #9=-#800-#824
#10=-#801-#825
#11=-#802-#826
#12=-#803-#827
N10 G90G00X#9Y#10Z#11A#12
M99

?? :scratch:

johnsattuk:

--- Quote from: antonio on March 05, 2017, 04:23:44 AM ---Manu thanks BrokenEye
why my sequenze starting from z?
:lol:

--- End quote ---

Common practice to take Z out of harms way first

Navigation

 Message Index

Go to full version