| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (83/202) > >> |
| chriscnc:
Rattmmotor still makes this controller and claim to have improved the hardware. I have been talking with the factory and claim they can customize the GUI/Screen. I believe they are just a OEM'er but they have contact with the real factory if they are not them. There Wechat id is jian-dan-ai_7758258 |
| Benedikt:
--- Quote from: BrokenEye on February 21, 2017, 04:17:35 AM ---- DDCSV1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor. I will do some more digging around for traces of the "Faster CNC" outfit --- End quote --- That's interesting! I have totally overseen that one. --- Quote from: chriscnc on February 21, 2017, 02:11:57 PM ---Rattmmotor still makes this controller and claim to have improved the hardware. I have been talking with the factory and claim they can customize the GUI/Screen. I believe they are just a OEM'er but they have contact with the real factory if they are not them. There Wechat id is jian-dan-ai_7758258 --- End quote --- I doubt they would give us any header files for the motiondev.c or our main application motion.out. If they would that would save us so many problems. Actual source code would be the best of course. Would you mind dropping them a line, chriscnc? I have started writing the new improved UI application. Progress can be seen on GitHub: https://github.com/bmuessig/PandoraUI |
| chriscnc:
Hey, Benedikt M. You bet ive been talking with them already, i think they would be willing (if they can). Let me ask.. |
| BrokenEye:
This may be of some use, all the function names and locations in the flash |
| Benedikt:
That sounds great I think i have found out how to upgrade the 3-axis to the 4-axis version. The board contains an i2c flash chip. From the markings it might be http://pdf1.alldatasheet.com/datasheet-pdf/view/421658/FUJITSU/MB85RC16.html |
| Navigation |
| Message Index |
| Next page |
| Previous page |