The Shop > CNC
DDCSV1.1 4 Axis controller
RobWilson:
Loooookin mighty fine Joules :thumbup:
Rob
Pete.:
Certainly is :thumbup:
Next time I make a delrin nut I will turn the OD rough and loctite it in.
Joules:
Pete, it still needs to be a pretty close fit. A smooth bearing with a cross hatch cut with a scribe will do, but the more surface area locked the stronger the bond. Cheers lads, might have a mill making it's way up North for a CNC conversion. Looks like I need to order another controller, already have the stepper drivers, Oooh yeah will need to figure what motors I am going to need too.
Another CNC thread coming soon :loco:
Will_D:
--- Quote from: Joules on August 17, 2016, 11:19:19 AM ---... The controller has plenty of options for altering settings related to its operation, you really need to read through the pdf manual a few times to take in all the settings. Extremely easy to program and navigate, you can tab through the settings using the X+ key. For setting the spindle options I was hopping between the home screen, config and 5 tabs to spindle settings. Still lots to learn.
--- End quote ---
Is this the same pdf thats available on the net or is it on a CD?
Really enjoying this thread as I am slowly succumbing to the CNC virus.
Joules:
Will, I used the pdf you posted the link too.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version