| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (76/202) > >> |
| ugv:
http://www.usinages.com/threads/essai-de-mon-changeur-outil-proto.94584/page-2 |
| philf:
Hi UGV, Welcome to MadModder. Do you have a drawing of how the tools are retained for your ATC? I am interested in doing something similar for an ER32 spindle. Phil. |
| Benedikt:
Nice work, ugv! :thumbup: I have just traced out the wiring of the keypad matrix of the controller: If you need a graphic of the controller front for any reason, I have made the following one: http://data.bmuessig.eu/CNC/DDCSV11/Images/DDCSV11.jpg You can use it for anything you want, I release the above image into the public domain, however, credit is always appreciated. |
| awemawson:
Hi UGV welcome. Would you like to post an introduction in the Introductions section: http://madmodder.net/index.php/board,3.0.html |
| ugv:
http://madmodder.net/index.php/topic,11953.0.html |
| Navigation |
| Message Index |
| Next page |
| Previous page |