DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (60/202) > >>

Benedikt:
Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated :)

Merlin201314:

--- Quote from: Benedikt M. on December 20, 2016, 04:09:04 PM ---Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated :)

--- End quote ---
That's sounds like a Christmas gift!

Benedikt:

--- Quote from: Merlin201314 on December 20, 2016, 05:16:40 PM ---
--- Quote from: Benedikt M. on December 20, 2016, 04:09:04 PM ---Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated :)

--- End quote ---
That's sounds like a Christmas gift!

--- End quote ---
Hopefully, I will finish it in time :scratch:
The current problem is, that the screen is mapped in a strange way. Every second pixel is simply skipped. I have absolutely no clue why.
My program works fine, but something with the framebuffer or it's configuration is wrong.

If somebody want's to try it out anyways, just extract the attached zip file onto a USB disk and power-cycle the CNC with the stick in.
To revert back to normal operation, just remove the USB and power-cycle.
Also note that you need to run the mod firmware (can be identified by the "Powered by MadModder" splash screen) to try this out.

But hey, after all, it is sort of working and actually compiling :beer:

Merlin201314:

--- Quote from: Benedikt M. on December 20, 2016, 07:37:13 PM ---
--- Quote from: Merlin201314 on December 20, 2016, 05:16:40 PM ---
--- Quote from: Benedikt M. on December 20, 2016, 04:09:04 PM ---Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated :)

--- End quote ---
That's sounds like a Christmas gift!

--- End quote ---
Hopefully, I will finish it in time :scratch:
The current problem is, that the screen is mapped in a strange way. Every second pixel is simply skipped. I have absolutely no clue why.
My program works fine, but something with the framebuffer or it's configuration is wrong.

If somebody want's to try it out anyways, just extract the attached zip file onto a USB disk and power-cycle the CNC with the stick in.
To revert back to normal operation, just remove the USB and power-cycle.
Also note that you need to run the mod firmware (can be identified by the "Powered by MadModder" splash screen) to try this out.

But hey, after all, it is sort of working and actually compiling :beer:

--- End quote ---
I am abroad for a few days now, but as soon as I am back I will try it for sure, in the meantime, a happy Christmas to all the community, and thanks Benedikt for your huge effort!
Best regards.

Inviato dal mio iPad utilizzando Tapatalk

Benedikt:

--- Quote from: Merlin201314 on December 21, 2016, 03:02:55 AM ---
--- Quote from: Benedikt M. on December 20, 2016, 07:37:13 PM ---
--- Quote from: Merlin201314 on December 20, 2016, 05:16:40 PM ---
--- Quote from: Benedikt M. on December 20, 2016, 04:09:04 PM ---Recently I have been working on a new display driver for the CNC that would allow my modded firmware to communicate with the user. It is making progress and I am soon going to try it on the controller. I'll keep you updated :)

--- End quote ---
That's sounds like a Christmas gift!

--- End quote ---
Hopefully, I will finish it in time :scratch:
The current problem is, that the screen is mapped in a strange way. Every second pixel is simply skipped. I have absolutely no clue why.
My program works fine, but something with the framebuffer or it's configuration is wrong.

If somebody want's to try it out anyways, just extract the attached zip file onto a USB disk and power-cycle the CNC with the stick in.
To revert back to normal operation, just remove the USB and power-cycle.
Also note that you need to run the mod firmware (can be identified by the "Powered by MadModder" splash screen) to try this out.

But hey, after all, it is sort of working and actually compiling :beer:

--- End quote ---
I am abroad for a few days now, but as soon as I am back I will try it for sure, in the meantime, a happy Christmas to all the community, and thanks Benedikt for your huge effort!
Best regards.

--- End quote ---
Thanks, and happy holidays to all of you :mmr:
As my final gift this year, here's a video and the source code of the video driver:

https://github.com/bmuessig/pdfbtext

Navigation

 Message Index

Go to full version