DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (56/202) > >>

BrokenEye:
On another subject RE the parameters, I copied the entire list printed in the "Datasheet" and I found out that you can indeed load the parameters from a file named uservar.set saved to a USB stick, it appears that you need a full complement for them to load, I tried just using 1 at first ( #33=200 ) but it didn't load so I wrote the whole lot out, and it did work!! can't guarantee that the others work but I think they just might.

i enclose the first uservar.set file I tried with arbitrary numbers so you may want to change them don't forget to change the extension to .set

old Zozo:

--- Quote from: Merlin201314 on November 30, 2016, 01:33:47 PM ---
The controller board you are using is manifactured for a Mach3 use, as is using a parallel port, and is tuned for the latency and other problem that the parallel port connected to a PC have in real time running.
Your new controller is much much faster and have nothing to do with this board :palm:
....................

--- End quote ---

:thumbup: :clap: What a true. You help me a lot, thank you very much. I just order some digital driver, thanks for links and advise.

Benedikt:

--- Quote from: BrokenEye on November 30, 2016, 02:19:54 PM ---On another subject RE the parameters, I copied the entire list printed in the "Datasheet" and I found out that you can indeed load the parameters from a file named uservar.set saved to a USB stick, it appears that you need a full complement for them to load, I tried just using 1 at first ( #33=200 ) but it didn't load so I wrote the whole lot out, and it did work!! can't guarantee that the others work but I think they just might.

i enclose the first uservar.set file I tried with arbitrary numbers so you may want to change them don't forget to change the extension to .set

--- End quote ---
Thanks a lot. This really helps me as i just don't have time to figure this out myself right now. I will work on the editor soon.

Avis:
Hello, I am new member of the forum, I also have the DDCSV panel, my question is if you can use a power supply like Link http://www.ebay.es/itm/351766147198?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT to power the panel or it would be better a PC type.
Greetings.

Merlin201314:

--- Quote from: Avis on December 03, 2016, 01:11:44 PM ---Hello, I am new member of the forum, I also have the DDCSV panel, my question is if you can use a power supply like Link http://www.ebay.es/itm/351766147198?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT to power the panel or it would be better a PC type.
Greetings.

--- End quote ---
I am using this one to power up mine, is cheap, small and plenty of power to drive the controller
http://www.ebay.co.uk/itm/172058668488
Cheers
PS. If you give us an idea of in which part of this globe you live, that would be great, thank you :beer:

Navigation

 Message Index

Go to full version