DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (30/202) > >>

Merlin201314:
I'm really doing nothing but just some bootscreen better than the original one, the heavy task is all on Benedikt shoulders, i wish i could help more, but i am good in 3d parametric design and graphic, nothing else :palm: .

BUT, for anything you need and i can help, here i am! :D

Benedikt:

--- Quote ---Peronally i don't think they worth 130/180 us$, i can buy a much better 5 axis one for 750$

--- End quote ---
Well I am absolutely stunned for how cheap they managed to sell this controller. They are absolutely worth their price as the product quality is quite high.
However as always with Chinese products the firmware is garbage.

Thanks a lot guys for your positive feedback!
Glad our work is helping others too :)

Merlin201314:
I was wonder if there is any combination in the keyboard to press at the startup than can boot in some programming mode? :med:

Benedikt:

--- Quote from: Merlin201314 on November 16, 2016, 10:52:50 AM ---I was wonder if there is any combination in the keyboard to press at the startup than can boot in some programming mode? :med:

--- End quote ---
If there is a way, then it is through the internal serial console or jtag. The device also always tries to boot from sd card first. I have not inspected the Mainboard too carefully, but maybe there is a header or even an unpopulated sd slot?

Also we can always try fixing the userland stuff. This would fix most problems except for the bootscreen and the axis configuration (i guess at least).

Merlin201314:
i'll have a look now and post some pictures, in the meantime my Probe routine is not working anymore, is the 2nd time that happen, any experience in the matter?
It start probing, but it not sense the touch, the connections are good as before

Navigation

 Message Index

Go to full version