| The Shop > CNC |
| DDCSV1.1 4 Axis controller |
| << < (28/202) > >> |
| Benedikt:
--- Quote from: Merlin201314 on November 15, 2016, 06:46:29 PM --- --- Quote from: Merlin201314 on November 15, 2016, 12:25:47 PM --- :coffee: How strange, the "G53" coordinate command is mentioned in the "english" configuration file, but in someway is hidden in the running program, as normally is the "safe" coordinate for the manual tool change if any for the older CnC. Then i do not find any reference to the "Enable M-Bus I/O command" and "M-Bus I/O default status" ...... :palm: There's a BIG mistery in this controller. Work in progress. --- End quote --- So, basically the tty is set up at 115.200 baud? and for what? to communicate between the cpu and who?...... :bang: --- End quote --- Communicate with you. It's a debug interface! |
| Merlin201314:
:lol: I'm not sure he want to communicate with me...... |
| Merlin201314:
I am going to delete all the programs from the controller, and try to reboot, lets see if your theory is valid, if not i will have a bricked controller :( |
| Benedikt:
--- Quote from: Merlin201314 on November 16, 2016, 03:43:26 AM --- :lol: I'm not sure he want to communicate with me...... --- End quote --- Neither wants it to communicate with me |
| Merlin201314:
--- Quote from: Benedikt M. on November 16, 2016, 03:46:51 AM --- --- Quote from: Merlin201314 on November 16, 2016, 03:43:26 AM --- :lol: I'm not sure he want to communicate with me...... --- End quote --- Neither wants it to communicate with me --- End quote --- Last night i was browsing, and i found a chinese website, they sell this controller for 10 us$ each :palm: umbelievable, i was shocked, all this work for 10 dollars. You have to buy a minimum quantity, but never the less is 10$. |
| Navigation |
| Message Index |
| Next page |
| Previous page |