DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (22/202) > >>

Merlin201314:

--- Quote from: awemawson on November 01, 2016, 06:51:44 AM ---Give him a break John, he's only just joined and is learning the ropes :med:

--- End quote ---
Sorry :bow: try to learn.....

Benedikt:
Oh, I am sorry, but I have not made much progress disassemblying the image. However the firmware is now almost ready. String lengths and content make a lot more sence now than they did before.

Right now I am finishing my CNC in my spare time. Currently I am looking into making a panel for my controller.
This is the design that I am going to submit to the company who lasers these control panels:

Any suggestions or improvements are highly appreciated :)

These are the translations of the different strings on the panel:
"CNC-FRÄSMASCHINE" = "CNC-MILLING MACHINE"
"NOT-HALT" = "Emergency stop"
"AUS/EIN" = "OFF/ON"

I am willing to share the original SolidWorks and DXF drawings on request so that you can modify them (or I can help you do this) and get one lasered yourself.
The holes for the controller are exactly measured from the actual DDCSV1.1 unit. The other holes are for the USB panel mount and for two screw mount panel switches. One being an emergency stop and one being a soft on/off rotary switch.

Regards,
Benedikt

Merlin201314:
Nice job, very clean panel, at the end you just need the minimum, the rest is on the screen(personal opinion).

I started milling some 2,5D shapes on wood to try the controller and how accurate is, i have to say that i'm quite happy for what i got ...
I will post some pictures just for share, they are just random shapes done in solidworks in a few minutes, but they give the idea.
Mach post processor it doesen't work, need some changes in the final file to work properly (this controller is generic fanuc G-Code)
Of course i will share pictures of my little router...
The tolerance measured on wood really surprised me.... let's look at the pictures later! :)

:worthless:
Catch you later guys
Regards

Merlin201314:
If you allow me, I would suggest you to add the space for the "All Zero" button in the front of the panel, that will save you to push the keyboard twice during the piece zero setup before the Z probe, Then if you are very demanding you can even add the Center Finder button, as is allowed by the controller setup...
Cheers 🍻

Inviato dal mio SM-N9005 utilizzando Tapatalk

Merlin201314:
I tried to upload some pictures, but it says I'm not allowed to do that due to security check failures

Inviato dal mio SM-N9005 utilizzando Tapatalk

Navigation

 Message Index

Go to full version