DDCSV1.1 4 Axis controller

[Muzzerboy]

This may have been asked before but the DDSV doesn't (yet) support lathe functions natively, so what is considered the next best option for a self contained controller for a lathe conversion? I'm sort of thinking LinuxCNC but it would have been really nice if the DDSV were available in a lathe flavour.

I'm familiar with the Newker / Newkye / SZGH / Adtech options which don't appeal TBH (Chinglish fatigue!). Wondered if there was something in between. The downside of LinuxCNC is that I'd soon have torn all my hair out and there's not as much left as I'd like as it is.

[kankarrio]

Thank you very much for your answers


as soon as work allows me to install the update to pandora

I wish I had the ddcsv the lathe option, it would also save me a lot of trouble

PS- I express myself very badly in English, I use google translator, I apologize if my words are confusing

[WeldingRod]

Are we pretty sure the 3.1 firmware works on the 4 axis 2.1 or 1.1 hardware?  Or is the only change in the hardware a new silkscreen?

My mad modder version has started stalling on gcode files for no clear reason.  I think it's time for a re-brain.  Mwah-ha-ha!

Sent from my SM-G892A using Tapatalk

[WeldingRod]

I can confirm the 3.1 factory firmware runs on the 1.1 hardware!!!

Key improvement: it actually TELLS you why it stopped ;-)

Sent from my SM-G892A using Tapatalk

[kankarrio]

Good morning, my English is not very good.

Could someone send me the latest stable Pandora?

The Pandora website doesn't work and I don't know which files I should download at https://github.com/Pandora-CNC

I have a ddcsv 2.1 and another ddcsv1.1

Thanks in advance

[Benedikt]

Could someone send me the latest stable Pandora?

The Pandora website doesn't work and I don't know which files I should download at https://github.com/Pandora-CNC

Hello, you can download the last version of Pandora Installer at the link below, as the website has been discontinued:
https://github.com/Pandora-CNC/PandoraInstaller/releases/tag/v1.7

[kankarrio]

thank you

I'm going to try it tomorrow

At the moment the version that I installed does not activate the A axis

Let's see if this new one is capable

[kankarrio]

Hi everyone
Thank you very much for the installer.

I have tried the six firmware that it has

and none have made the A axis appear on the screen

I don't see any option in the configuration for it either, although there are all the parameters of axis A

well I finally left the factory 03/06/2020