Gallery, Projects and General > The Design Shop

Giffard boiler water injectors

<< < (2/3) > >>

ozzie46:
   L.B.S.C. of Model Engineering fame used injectors in many of his model Locomotive designs and claimed they were fairly easy to make and use if you followed his "words and music" as he refered to his instructions. I can't claim to have any first hand knowledge of such as I have never attempted to make any yet.
   

    Ron

chipenter:

--- Quote from: ozzie46 on June 26, 2016, 10:00:00 AM ---   L.B.S.C. of Model Engineering fame used injectors in many of his model Locomotive designs and claimed they were fairly easy to make and use if you followed his "words and music" as he refered to his instructions. I can't claim to have any first hand knowledge of such as I have never attempted to make any yet.
   

    Ron

--- End quote ---
It's the reamers that are tricky to make , to soft and the ends twist off to hard and the ends snap off .

Noitoen:
There is a guy here in Portugal that has built some. I can't remember his web site but I will search a little. Here is a video in Portuguese. https://youtu.be/m2u3kivLDL0


Web page no longer exists I found a Facebook link https://pt-pt.facebook.com/vaporvivo/

picclock:
Hi all

I have just found this thread on Madmodder

http://madmodder.net/index.php/topic,10761.0/all.html

which gives all the information I was after.  :Doh:

Just didn't search with the correct terms ....

Best regards

picclock

sbwhart:
Hi

They can be a bit tempremental but get it correct they work like a dream I have one I made fitted to my loco that I run most week ends and it works very well

Stew

Navigation

[0] Message Index

[#] Next page

[*] Previous page