The Shop > Tools

Elbow grease in a ultrasonic tank?

<< < (2/2)

Rick O Shea:
Thanks for the prop wash, due to dyslexia I read it as hogwash.......

I use paraffin at the moment and have tried a variety of things in the past, I will have a look at panel wipe, does it contain Zylene? which I can't stand.

many thanks for the help so far.
 

Joules:

--- Quote from: DMIOM on June 22, 2016, 03:32:57 PM ---
--- Quote from: appletree on June 22, 2016, 02:31:15 PM ---Hi what is propwash please? ...

--- End quote ---

Used to clean up after spilling either the green oil burnt in the starboard navlight or the red oil burnt in the port navlight on the golden rivet....

(actually propwash is the air current behind a propeller......)

--- End quote ---

Strewth, what a job blending the oil for white light, I had no idea.

mechman48:

--- Quote from: Joules on June 23, 2016, 05:14:48 AM ---
--- Quote from: DMIOM on June 22, 2016, 03:32:57 PM ---
--- Quote from: appletree on June 22, 2016, 02:31:15 PM ---Hi what is propwash please? ...

--- End quote ---

Used to clean up after spilling either the green oil burnt in the starboard navlight or the red oil burnt in the port navlight on the golden rivet....

(actually propwash is the air current behind a propeller......)

--- End quote ---

Strewth, what a job blending the oil for white light, I had no idea.

You need blue oil to blend with the red & green... three primary colours to give 'white light'... as long as you get the ratios correct... :thumbup:  :palm:

George.

--- End quote ---

Navigation

[0] Message Index

[*] Previous page