Gallery, Projects and General > Project Logs

home made mill

<< < (19/23) > >>

chipenter:
Iff you have a corser thead on the draw bar it will pull the taper in and then release by unsrewing , turn the chuck or cutter in untill friction is felt tighten the nut a turn or two , jobs a goodun .

Henning:
I do have one of those "undo"- caps on my Emco FB2 mill. All it really is, is a sleeve or cap over the drawbar bolt which resist the force of the screw coming up. Rather simple really.

krv3000:
hi its a live its a live made my take on the ejector nut 17mm c/f stanles steel drilled out to 15.3mm taped 16x1 mm by 30mm deep drilled a 7.3 hole in the top for the alan key to fit threw clocked the head in had a bit play with a block of aluminium then put the flats on the two new back lash screws then made up the two locking screws  right sum pics    ps   any on no where I can get sum of that lovear rubber to make bed covers with   

tom osselton:
Well done Bob your a man of many talents! :thumbup:

doubleboost:
Very nice Bob
Wont be long until we get some video of the mill working
John

Navigation

[0] Message Index

[#] Next page

[*] Previous page