| Gallery, Projects and General > Project Logs |
| home made mill |
| << < (2/23) > >> |
| krv3000:
hi all things have bin going slow with the mill I striped out the head all of the bearings need replacing one shaft badly scored made a new one went to work this morning did watt I had to do then set to on the two plats that will be the upright ruft them dawn to size then grind them to the proper size plus sum pics of the mashean shop right pics |
| krv3000:
more work shop pics |
| krv3000:
well can any one help the draw bolt on the mill is m8 but the MT2 sleeves have a m10 thread in them their is sum sort of thread adaptor that goes ether on the draw bolt or in to the tooling can any one help with pics of the item I need to make up will post sum more pics soon |
| Steamer5:
Hi Krv, Here ha go! Hope the sketch is clear enough, if not please ask! Cheers Kerrin |
| nrml:
Those workshop pics are tool porn :drool:. |
| Navigation |
| Message Index |
| Next page |
| Previous page |