Gallery, Projects and General > Project Logs

home made mill

<< < (10/23) > >>

John Rudd:
Ok,

Rule of thumb is 70 mfd per 1kw ......
If the kw rating of the motor is 0.25 kw, then a 22mfd capacitor is what you need...but it must be rated for 250v AC....

DavidA:
The info I have on my EMCO indicates that they come in two versions (electrically).

The single phase 0.16 Kw (0.25 HP)

and the three phase 0.25 Kw (0.34 HP)

I have the parts list and exploded drawings for the machine if you need any parts info.

Dave.

krv3000:
hi all thanks for the help on the cap the one that's on that's off me lathe can not tell watts printed on it cos its all bin rubbed off lol but the lathe motor is bigger    there was a chap on the bay selling the two of them I.E the one for the lathe motor and the one for the mill motor I sent him a email asking if he wood sell me the one for the mill or give me the info of the one for the mill  but got no answer back er  don't think its 3 phase as its running on 240 volt

seadog:
If it's 440v it must be 3 phase Bob

krv3000:
o well will have to look in to it will probably have to by one of them inverter things

Navigation

[0] Message Index

[#] Next page

[*] Previous page