| Gallery, Projects and General > Project Logs |
| home made mill |
| << < (6/23) > >> |
| krv3000:
DavidA hi hear is sum pics of the mill Colom I can move the Colom all the way from left to right and there is a pic of watt john has to cut in to the extension right pics |
| krv3000:
hi all john milled in the two cut outs for the two nuts that will hold the extension to the Colum and a brill job he did thanks john set the extension up today to find out haw much of the extension needs cutting dawn by the length of the extension will be 130MM long by the time I mashie the end right pics |
| doubleboost:
It was a pleasure Mate There is a bit video on my you tube of the machining John |
| tom osselton:
Its coming along verry nicely good job! |
| krv3000:
hi all on the final stretch was at work today so I finish off the mill head extension set it up in the 4 jaw chuck then clocked it in then took the end dawn to size then to length then put the grove in for the clamping brackets will put sum more pics up tomorrow of the hole thing coming together right sum pics of watt was dun today and thanks for all the comments |
| Navigation |
| Message Index |
| Next page |
| Previous page |