Gallery, Projects and General > Project Logs

CNC Mini Mill Project Hayabusa breather cover

<< < (3/3)

RotarySMP:
Do you use the motorbike gearbox and chain final drive? Or only the motorbike engine, and take the primary drive into an automotive gearbox?
Mark

davro:
AdeV Yes it's a Dax Rush round tube chassis with camber compensation, I get my composite stuff from easycomposites only do infusions, I have some of the black stuff carbon thou I normally just use normal twill for the outside layer with Carbon Fibre 45' Biaxial 300g as internal layers I find the biaxial criss crossed gives very good strength.

RotarySMP, Use the standard gearbox with an upgraded output shaft and a drive coupling kit.


The sierra propshaft been modified cut and re-balanced to accept a quaife transfer reverse box, so I have six gears in forward and six gears in reverse :) Reckon I could do about 110mph in reverse if I ever needed :thumbup:

RotarySMP:
 "I could do about 110mph in reverse if I ever needed :thumbup:!

Handy... You never know when you need it.
Mark

Navigation

[0] Message Index

[*] Previous page