Home Base > Introductions

Hi all first time posting from sunny Lincolnshire

(1/3) > >>

TAB:
Hi all, just a brief introduction, I've been in the engineer sector for getting on 10 years, the last 3 of which have been self employed, I've a little machine shop set up now where I'm scraping a living together. So far consists of Mitchell-Woodhouse junior  70, a Herbert number 4 senior capstan, a Harrison vertical mill, a Norton surface grinder, a Van Norman 777 and a few other bits and bobs to go along with them :)

I've picked up one or two things here scrolling through threads which have been most useful/ needed sometimes and thought it was about time i made an appearance.

So yea, hi all

Joules:
Hi TAB, another one here working from home trying to make a living.  Hope you enjoy the mayhem here.  Pictures of what you make/do are always welcome.

awemawson:
Hi Tab welcome - glad you poked your head above the parapet  :wave:

Let us all know what your doing and what your interests are. As you'll already have discovered there's a lot going on in the forum to lead you astray  :lol:

NormanV:
Hi Tab, welcome.
I have to warn you that Andrew (AWEMAWSON) is one of the worst to lead you astray!  :)

krv3000:
hi and welcome

Navigation

[0] Message Index

[#] Next page