Home Base > Shows etc...
Doncaster Model Engineering Show 2016 (20-22nd May)
Joules:
http://www.thedoncastershow.com
Thought I would put this up for those that may not have seen. Harrogate has relocated to Doncaster race course ? At least we should be able to buy some cheap glue this year, and the burgers will be fit :wave:
Anzaniste:
I would be on holiday when the show comes to my home town :doh:
Joules:
LOL and your only up the road from us....
John Stevenson:
I'm going.
I will be there for the whole 3 days with a small stand supplied by the organisers and will be taking a couple of end mill grinders and a drill grinder.
People are welcome to bring cutters for sharpening but it will only do the ends, no flutes and go from 3mm to 20mm in HSS and carbide.
2 flute, 3 flute or 4 flute, no charge but there will be a charity box supplied by the organisers.
The drill grinder will do 3mm up to 20mm parallel shank or taper shank, again HSS or carbide.
Having said this the first 5 Herberts will roll up with 6 flute cutters and want the flutes grinding.
chipenter:
Too far for me the south east show has also relocated to Brooklands motor museum in Saptember .
Navigation
[0] Message Index
[#] Next page
Go to full version