Gallery, Projects and General > Project Logs

Storebro Combi-Mill CNC.

<< < (7/8) > >>

NeoTech:
Wiiih first cut.. not much but something on a piece of scrap.. Still amazeballs for me. =)  :med:

https://www.youtube.com/watch?v=o31X1UvdHNc

RotarySMP:
Cool. that is a milestone.

Mark

awemawson:
.... so just maybe that controller isn't as bad as you thought ........  :scratch:

NeoTech:
Well its as userfriendly as a piece of lump coal. But it works.
And adding onto it like a 4th axis would be a nightmare i'm guessing. =)

NeoTech:
So here is a dry run of the DNC Dripfeed over a serial connection. i Got CTS/RTS working over 9600 baud and its really stable.
For communication i used a UC232R-10 from FTDI, i tried like 7 of these usb to serial dongles, but this one was really stable.
I had one of the "same" but it was apparently a chinese knock off, but the real deal. is really good.

Warning the volume is kinda high..

Navigation

[0] Message Index

[#] Next page

[*] Previous page