| Gallery, Projects and General > Project Logs |
| Storebro Combi-Mill CNC. |
| << < (7/8) > >> |
| NeoTech:
Wiiih first cut.. not much but something on a piece of scrap.. Still amazeballs for me. =) :med: https://www.youtube.com/watch?v=o31X1UvdHNc |
| RotarySMP:
Cool. that is a milestone. Mark |
| awemawson:
.... so just maybe that controller isn't as bad as you thought ........ :scratch: |
| NeoTech:
Well its as userfriendly as a piece of lump coal. But it works. And adding onto it like a 4th axis would be a nightmare i'm guessing. =) |
| NeoTech:
So here is a dry run of the DNC Dripfeed over a serial connection. i Got CTS/RTS working over 9600 baud and its really stable. For communication i used a UC232R-10 from FTDI, i tried like 7 of these usb to serial dongles, but this one was really stable. I had one of the "same" but it was apparently a chinese knock off, but the real deal. is really good. Warning the volume is kinda high.. |
| Navigation |
| Message Index |
| Next page |
| Previous page |