The Shop > Electronics & IC Programing

Any Telephone Engineers on the forum ?

<< < (5/5)

tom osselton:
For the illegals that part is easy just install speakers under the throne they will think it is haunted!  :beer:

DMIOM:
Adds a new interpretation to "just going to pay a call" - and have you wired any of those buttons on the telephone set up as button "A" and "B" for those spending a penny? - and with all that electrickery on tap, is the door solenoid/RFID locked?

Dave

awemawson:
Shortly after we moved here, we had a visit from a fellow (Neil Farrow) who leased the farm from the 1950's and subsequently bought it when the 'leasehold reform act' came into being. He was in his nineties, and so much had changed since he was last here, literally the ONLY thing he could recognise was the Outside Loo - I didn't dare show him what was inside!

Apparently he was the first person in the village to have a tractor - popped his clogs now poor chap.

daber:
This is a bit off topic  :offtopic: but I had a problem with DSL and my Actiontec M1000 with drop outs and reboots.  Century Link said it was my modem so I changed modems after considerable back and forth testings and conversations with tech support.  That temporarily solved my problem.  I being an electronic tech sort of guy opened up the original modem and found bulging caps so I replaced them and it has worked perfectly ever since only have a few dropouts over 6 months.  I also opened up the second replacement modem that was as used unit also and found the same bulging caps and a few more.  I replaced those too and retested with the same good results.

Pete W.:
Hi there, all,

This has been a very interesting thread - thank you all. 

Navigation

[0] Message Index

[*] Previous page