| Gallery, Projects and General > Project Logs |
| X2 CNC Conversion |
| << < (5/9) > >> |
| raynerd:
solding your own board :clap: - once you have your cnc conversion you could mill your own pcb as well :) What plans are you using for this conversion? |
| spuddevans:
That's looking pretty good Eric :clap: :clap: There's something quite theraputic ( such bad spelling ) about soldering up a board. Ahh! the sweet smell of flux, takes me back to happy times studying the 'scope and picking the tiny bits of capacitor out of myself and cursing not having double checked the polarity of the elecrolytics :zap: :lol: I think if I ever convert to cnc I'll do it the kit way like you are doing. Tim |
| Brass_Machine:
The plans are from fignoggle. That is only the motor mounts etc... The controller kit is from hobbyCNC. Eric |
| SPiN Racing:
Im not sure.. but the X2 is like a desktop sized machine is it not? That type of CNC is not compatible with something like a bridgeport is it? Too small? |
| Bernd:
Spin, This will give you an idea of how big it is. http://www.grizzly.com/products/Mini-Milling-Machine/G8689 Can't set a Bridgeport on the Shop Fox bench. :) If you do you'll have very small peices of the Shop Fox. Bernd |
| Navigation |
| Message Index |
| Next page |
| Previous page |