| Gallery, Projects and General > How do I?? |
| How do I file square? - and what files? |
| << < (2/2) |
| Darren:
You can put the work on the compound slide and a milling cutter in the chuck. Or mount the work in the chuck if it will fit and lathe it flat/square. If you want to file it clamp it between two pieces of angle iron in the vice. |
| raynerd:
Well I have just cut it out from the block and looks like a dog has been at it. I will have a think - I`m going collecting my lathe from Johns tomorrow night so will take it with me and see what he would do - with my kit! Darren - thanks for the idea regarding clamping between iron as a straight edge. kvom - don`t have a 4 jaw yet but never thought of that idea, I only thought of "milling" it how Darren explained. Chris |
| Darren:
Before I had machines I used to file with angle iron and an angle grinder fitted with a flap wheel. It works quite well. Finish off with proper filing though. |
| bogstandard:
Chris, --- Quote ---I`m going collecting my lathe from Johns tomorrow night so will take it with me and see what he would do - with my kit! --- End quote --- As I told you by email, I will help anybody, as long as the time frame and whether it suits me comes into it. I will not be treated as a charity to be called on whenever it is needed. It just so happens I have a major appointment tomorrow with a spinal specialist, so tomorrow afternoon, I don't expect to be able to walk properly never mind discussing how to do something. The gibs on your lathe have been done and it is all running ok, but because I haven't been feeling too well, and because I have another job that has taken up what little time I have had in the shop (now overun by at least a week), I haven't been able to get the handwheel done. So the lathe can be picked up tomorrow, but the mod will have to wait until another time. John |
| raynerd:
--- Quote ---As I told you by email, I will help anybody, as long as the time frame and whether it suits me comes into it. I will not be treated as a charity to be called on whenever it is needed. It just so happens I have a major appointment tomorrow with a spinal specialist, so tomorrow afternoon, I don't expect to be able to walk properly never mind discussing how to do something. --- End quote --- With the greatest respect, John, I was meaning to seek advice as to what you would do with the piece in my circumstance and with my kit during our prearranged meeting tomorrow. I was not meaning to "treat you as charity"... I sha`nt bring the piece. Apologies if I have caused offense. Chris |
| Navigation |
| Message Index |
| Previous page |