| Gallery, Projects and General > Project Logs |
| Homebrew engraver to 3D printer Mod |
| << < (10/17) > >> |
| AdeV:
Does the machine have limit switches? If so, is one of those playing up? |
| BillTodd:
--- Quote from: AdeV on November 10, 2018, 05:27:31 AM ---Does the machine have limit switches? If so, is one of those playing up? --- End quote --- The machine has the switches from a previous life, but I don't think they're actually connected . I will check Thanks |
| BillTodd:
--- Quote from: efrench on November 10, 2018, 12:03:19 AM ---None that the slicing software would put there. --- End quote --- Any that might getin via a bug or otherwise? Come to think of it, would the main printing process know if the 12v rail just disappeared? May be I'll disconnect the PS_on signal (hard wire it on) and tey again. |
| efrench:
LinuxCNC gcode is pretty simple, so looking for any kind of a stop or pause code can be done with a search for "M". If any "M"s are found, check the docs to see what it does. |
| BillTodd:
Thanks guys, Decided I'd spend the afternoon extending the Z range (as I need the extra height to print my engine parts) Got a little greedy, made the extenders too long and the nozzle wouldn't reach the bed :Doh: Fortunately, the weather here is silly warm for the middle of November , so was able to fix it after dark - in a T shirt in my unheated shed!. |
| Navigation |
| Message Index |
| Next page |
| Previous page |