| The Shop > Tools |
| Palmgren mill adapter |
| (1/1) |
| Pelallito:
Guys, I complained a while ago about milling on the lathe. Since I made and installed the steel gibs for my Atlas lathe, I can't believe the differece it made. I have to thank Bogs for the advice! :bow: I can control what I am doing if I use a little patience now. I made a T nut to hold the SB TP grinder and it worked great until I pushed it beyond its limit. With a litttle more experimentation and practice I 'll be able to make things accurately with it. I am thinking of trying this on the lathe-http://www.statecollegecentral.com/metallathe/A-11.html I will have to check the dimensions to see if it will fit in the milling adapter. OOPs just read this-A milling machine is required for machining the cross slide. Oh well, back to using a mll. :bang: Thanks to all. Regards, Fred |
| bogstandard:
Fred, --- Quote ---OOPs just read this-A milling machine is required for machining the cross slide --- End quote --- It is times like this you have to be very inventive and resourceful, or have good friends. Bogs |
| Pelallito:
Bogs, I will try both of those methods, and perhaps a little bit of bribery! :D Maybe this too :( Fred |
| Navigation |
| Message Index |