| Gallery, Projects and General > Project Logs |
| Cnc minimill |
| << < (7/9) > >> |
| chipenter:
Got the end stops wired to the board and as tidy as it is going get , the Z gets realy tight at the bottom of the travel so it's apart again to fix that . |
| chipenter:
It's been a while this project has gone though a lot of changes and delays, fried the board changing stepper connections with power still on , stepper motors changed for more powerfull ones ,and made larger pullys witch needed longer belts , went for LCD screen with the new ramps board , more learning screen only works with Marlin 3d printer software , got it sort of workin will print from SD but steppers just squeel moving axis using the screen , havent found the right feed jerk and alseleration yet . |
| chipenter:
It's alive sort of it wont do rapid moves G0 G28 or G92 , keep changing the setting but onlt does slow . |
| vtsteam:
I'm impressed with all the hard work that you've put into this, chipenter, good to see that you've got it working. :thumbup: I really hope that you can iron out the remaining bugs -- I think you will. :beer: |
| chipenter:
It's dead fried the power supply so on hold until I can get another . |
| Navigation |
| Message Index |
| Next page |
| Previous page |