The Shop > Tools

Hobby Lathe Recommendation

<< < (2/2)

nrml:
My understanding from internet research is that the slightly bigger far eastern lathes are better in quality than the mini lathes (7X14 and similar). My mini lathe wasn't well built or put together by any description. However, it works and the runout on the spindle is excellent. Shame the rest of it isn't as good. With a bit of effort and following in the steps many have already trod, I could get it to an acceptable condition. The problem is finding the time to do it.

Navigation

[0] Message Index

[*] Previous page