Gallery, Projects and General > Gallery

Tubular nuts...

<< < (2/2)

Manxmodder:
Nice job Kjelle. I don't know if you are aware of a product known as Wellnuts,or if they are any use for your particular application.

I use these quite often and because they are rubber they also seal out any water ingress very well.....OZ.

Well Nuts link: http://www.ebay.co.uk/itm/like/151127175188?adgroupid=16885268106&hlpht=true&hlpv=2&rlsatarget=kwd-124273563186&adtype=pla&ff3=1&lpid=122&poi=&ul_noapp=true&limghlpsr=true&device=c&chn=ps&campaignid=270621186&crdt=0&ff12=67&ff11=ICEP3.0.0-L&ff14=122&viphx=1&ops=true&ff13=80

awemawson:
And they come in M3:

http://www.ebay.co.uk/itm/M3-M4-M5-M6-M8-M10-Rubber-Well-Nuts-Expanding-Nut-Cavity-Wall-Fixings-Rubber-Nut-/221302990033

Kjelle:
Thanks, guys! Wasn't aware of "wellnuts", but this might come in handy one day! And Noitoen, I could have done as you suggested, It's also an excersise in lathe-work for me, I haven't done anyting like this since I left school (35 years ago!).

Kjelle

Navigation

[0] Message Index

[*] Previous page