Gallery, Projects and General > Gallery
ER32 Collet Fixture
Brass_Machine:
That's a fine looking piece of work. Very professional.
If you were making them, I would buy one.
Eric
howsitwork?:
:bow: Very impressive. Have to look at that concept.
The ER32 chucks can be bought with a small backplate attached, cos I've not got a CNC to play with( bank manager says NO!) :(
Arbalist:
--- Quote from: Brass_Machine on November 29, 2015, 09:31:49 PM ---
If you were making them, I would buy one.
Eric
--- End quote ---
ER32 Lathe chucks are cheap to buy, just turn the outer diameter down to what you want and add extra holes if you need them.
Jonny:
Heres mine been on since 1999, 5 1/4" chuck no through holes, 4 T slot and direct to RT no adapter.
http://i1140.photobucket.com/albums/n563/Jonhareng/Jons%20machining/RamFixing6PCD.jpg#
http://i1140.photobucket.com/albums/n563/Jonhareng/Jons%20machining/RamFixing5.jpg
Navigation
[0] Message Index
[*] Previous page
Go to full version