Gallery, Projects and General > Gallery |
ER32 Collet Fixture |
<< < (3/3) |
Brass_Machine:
That's a fine looking piece of work. Very professional. If you were making them, I would buy one. Eric |
howsitwork?:
:bow: Very impressive. Have to look at that concept. The ER32 chucks can be bought with a small backplate attached, cos I've not got a CNC to play with( bank manager says NO!) :( |
Arbalist:
--- Quote from: Brass_Machine on November 29, 2015, 09:31:49 PM --- If you were making them, I would buy one. Eric --- End quote --- ER32 Lathe chucks are cheap to buy, just turn the outer diameter down to what you want and add extra holes if you need them. |
Jonny:
Heres mine been on since 1999, 5 1/4" chuck no through holes, 4 T slot and direct to RT no adapter. http://i1140.photobucket.com/albums/n563/Jonhareng/Jons%20machining/RamFixing6PCD.jpg# http://i1140.photobucket.com/albums/n563/Jonhareng/Jons%20machining/RamFixing5.jpg |
Navigation |
Message Index |
Previous page |