The Shop > Tools

Quick Change Tool Post for mini-lathe - clarification

<< < (4/4)

ja2on:
here is just a quick pic of my tool post (different from the one arc euro sell)
I know my lathe is a c4 but as far as I know its the same size tool post


it uses the standard post handle
and you can see the cap head screw on the side which tightens the dovetail on to the tool holder
the two problems i have with it are the base was not flat a quick lap solved that problem
and the cap head screw with the hight adjuster nuts is really lose on all three of my holders
I will probably find some tighter fitting threaded rod or make some and lock tight them in

Navigation

[0] Message Index

[*] Previous page