The Shop > Our Shop |
Simple DIY toe jack plan? |
(1/5) > >> |
PekkaNF:
I Have a small cheap 2 metric on bottlejack. Sometimes a small toejack would be nice. Doeas anybody has a simple, but effective toe jack palns or picture to share? I have seen some some pictures of very crude ones, that put load on hydraulic slinder rod/seal. I don't like that. Then I have seen a picture of the one that must be a functional, but a bit overkill with all machined slides etc. I can relae to that, but this is chinese jack, I'm not going to chrome it. Thanks, Pekka |
lordedmond:
Pekka Have a look for oxtools YouTube vids in one early one he does just what you are doing note he does a mod to a potapac one in a recent one so look back a bit Stuart |
PekkaNF:
That one? Pekka |
lordedmond:
Yep |
JHovel:
Here is a simple one I made. Someone copied it and found that it was better to have a baseplate with the 'toe' cut out to go under the machine. |
Navigation |
Message Index |
Next page |