The Shop > Tools

Atlas Shaper Crossfeed

(1/6) > >>

Sackett:
I cant get the power crossfeed working on my Atlas shaper. The gear "appears" to be a slip fit on the shaft,, no visible means of tightening it,,,no set screw, or pin.If I engage the power feed, the ratchet just rocks back n forth, as the gear turns on shaft. Feeds fine by hand with wrench on shaft.I've taken apart ,n put back together several times to no avail. Anybody with one of these machines got any ideas??? help needed please

vtsteam:
Wish I could help. Mine is still in bits. Do you have a manual? Do a search online, if not.

Sackett:
got manual,,,n shows how goes together,, but nothing on how to keep gear from turning on shaft

tomrux:
Just had a quick look at my shaper, while it aint an Atlas it is a copy.
The cross feed cog is pinned to the shaft. looks like a taper pin.

Tom R

ieezitin:
your Pawl maybe missing.

Here is a exploded drawing for you.

Anthony.

Navigation

[0] Message Index

[#] Next page