Gallery, Projects and General > How do I??

Any Mathmatitions On Line (lathe change wheels)

<< < (7/7)

John Hill:
I will be very disappointed John if you do not make a 63 hole indexing plate.  :coffee: You make the first one then make another from it and each time you do that the errors are averaged until you have the accuracy you require.

Thats what Henry Maudslay would have done! :bow:

trapper:
Yes John as has been said 15holes on a 24plate it is 5/8turn you want if your going to put up with a 64tooth gear,or multiply 5/8 by whatever you have( 5/8x3=15holes24plate)5/8x4=20holes 32plate(5/8x8=40holes 64plate) etc-Good Luck

Navigation

[0] Message Index

[*] Previous page