The Shop > Tools

phase convertor

<< < (5/10) > >>

John Rudd:
Dave
It may be worth considering buying a transformer if you have the money....
Try Drives Direct and ask for Dave..
No affiliation etc.....

DavidA:
 John R,

Thanks for the tip.  I'll do that.

Dave :thumbup:

DavidA:
John R,

Successful outcome with Drives Direct. Transformer arrives Thursday.

Thanks again for the tip.

Dave.

Thomas Webb:
Hello Andrew, I have a welder it is 440v or 240v (89 and 100v)input Will it be ok to step up on rotary converter?

Andrew Wildman:
Thomas, that will probably be a bit high as the voltage I get is higher than the 415 tapping of the transformer if the load is not optimum for the caps that I used. Also will require 500v caps which you may find hgarder to get hold of.

Navigation

[0] Message Index

[#] Next page

[*] Previous page