The Shop > Metal Stuff

Wanted: Perforated Zinc sheet

(1/3) > >>

awemawson:
Where do I buy perforated zinc sheet these days? Search on ebay and all you get is Meccano  :bang: (of course those are steel strips zinc plated)

I only need a tidly bit about 1.5" x 9" - I've got loads of perforated steel zinc plated, but this is for a sacrificial anode so needs to be all zinc.

Fergus OMore:
Unable to help- meat safes are out of date.

However, you should be able to buy sacrificial zinc from builders etc of steel boat hulls.

Again, Type metal is probably zinc.

Cheers

Norman

A Former Arse to the maaast matelot! That's gibe--- if you don't know

vtsteam:
Lead, Norman, with antimony. I have what must have been a pretty big spill of some at a former newspaper press building. Found it adhering to the basement floor and filling a large crack in the concrete at an optical firm I worked at when they were moving. I asked if i could have it during the move they said, sure, if you can pry it out.

Did so, and now I have it. Lead for sure.

RussellT:
Modern wheel weights are zinc or steel.  Easy to tell apart - but they don't come in perforated sheets.

It might be worth sending a message to this ebay seller

http://www.ebay.co.uk/itm/Perforated-Zinc-Sheet-2-2mm-Hole-Mesh-Metal-Sheeting-per-Metre-7ZG-Gauge/321323513156?_trksid=p2047675.c100037.m2107&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20140513073955%26meid%3D96f91a4e338b4678bc2774b2f184d481%26pid%3D100037%26rk%3D1%26rkt%3D1%26sd%3D321323513156

Russell

mattinker:
Does it have to be perforated?

regards, Matthew

Navigation

[0] Message Index

[#] Next page