| The Breakroom > The Water Cooler |
| 3D printing |
| << < (15/21) > >> |
| picclock:
Hi PeterE The display card you have is a 4 line text display - as is the one I incorrectly ordered. The display card I should have ordered is a graphic display - but I screwed up and ordered the wrong one :bang: One of those late at night jobs .. . The difference is that the graphic display can show temperature plots and other non text stuff and its easier to navigate between menus. Not sure if the text display will do the run standalone bit. Have ordered correct one for £8.39 - don't usually make that kind of mistake. Pictures below for reference . Best Regards picclock |
| PeterE:
Aha, THAT was the difference :palm: I just thought it gave more text rows ... |
| picclock:
@ brass machine typo error - should be years :Doh: hopefully you will learn a whole new lot of mistakes from the logs. Best Regards picclock |
| Arbalist:
Good luck to all those building these machines but I'm still left wondering why. This article reinforces many of my thoughts. Even if I made plastic models the quality from many machines leaves a lot to be desired. http://www.techrepublic.com/article/3d-printing-10-factors-still-holding-it-back/ |
| RobWilson:
--- Quote from: Arbalist on November 07, 2015, 06:27:21 AM --- http://www.techrepublic.com/article/3d-printing-10-factors-still-holding-it-back/ --- End quote --- What a load of bollocks ! Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |