Gallery, Projects and General > How do I??

Sears Drill Press Stand

(1/1)

Chuck in E. TN:
 What to make from it?
I picked up a Sears drill stand type drill press for a couple bucks at a yard sale. What can I make from it? Any ideas? I was thinking of adapting it to a Dremel type tool or maybe a sensitive drill/tapping stand.
I already have a medium sized bench top drill press.
Chuck

vtsteam:
I have one of those in the scrap heap. Maybe put supermagnets in the base for a poor man's mag drill.

vintageandclassicrepairs:
HI,
How about mounting a 4" mini grinder on the stand  to use as a cut off saw?

John

PeterE:
The base and the pillar lend themselves very well to make a tapping and staking tool from.

The simplest version is an adapter that fits where the drill was and a short shaft with a small drill chuck and a crank. A more elaborate vesion at least for tapping will be shown in the next issue of Model Engineers Workshop if I noted it correctly.

/Peter

Navigation

[0] Message Index