Gallery, Projects and General > Gallery

My 1930 Edgwick mark one lathe

(1/1)

Edgwick one:
Here she is the 1930 Edgwick serial number D26

mattinker:
David ,

your speed change is different to mine and it has a different brass plate!


Your thread dial is as ilegible as mine!

Regards, Matthew

AdeV:
Early Edgwicks had the clutch lever top-LHS of the headstock (you can see the end of the shaft on your headstock); on later ones they moved it to the bottom RHS (a much more sensible location) using levers & bosses on the back of the lathe.

I believe the gear selectors are actually the same inside; just with a different style boss.

Edgwick one:
Sorry about the picture quality I will try to get some better pictures and bigger to

Edgwick one:
Oil for headstock gearbox someone has suggested using Shell Tellus which is Hydraulic oil.     I would of thought there was a proper oil perhaps a diff oil or gearbox oil would be better

Navigation

[0] Message Index