The Breakroom > The Water Cooler

tyre valve

(1/2) > >>

krv3000:
hi all a bit off the wall tyre valve any one no watt thread they are not the out side where the cap goes on but the inside where the valve gets scruwd in

mattinker:
Hi,

it' a Schraeder valve, here's a link, thread types a little bit down the page in dimensions.

https://en.wikipedia.org/wiki/Schrader_valve

Regards, Matthew.

Bluechip:
At one time Tracy Tools had the taps 'cos I've got some somewhere, and the little tool to get the valves out ...

Looking a bit doubtful now though ...  :scratch:

http://www.tracytools.com/taps-and-dies/schrader-valve-taps

Dave

Jonny:
Making regulators?
Had a hss tap 17 yr ago though the cleanup ones are available from some car places along with higher pressure valves.

krv3000:
thanks all its for work we use gas springs witch we refill but sum of the adapters that fit the regulator need now ones making so was wonting the thread type and size as we will need both tap and dye   

Navigation

[0] Message Index

[#] Next page