The Shop > Tools

Sumitomo F2C-A15-89 REDUCER 14MM QUILL

(1/2) > >>

Xenocide:
I've got a Sumitomo F2C-A15-89 REDUCER 14MM QUILL

Is it any use for anyone (UK only - it's heavy!).

I got it in a job lot of gear from a closing factory.

http://www.sumitomodriveeurope.com/en/motion-control-drives/fine-cyclo/

PekkaNF:
Too bad, looks like couple of kilos only.....

Would be pretty prefect basis for my indexer project ...Cheap RT has way too much backlash and the harmonic drive I got was too small, and it was missing some bearings.

Pekka

Xenocide:
For god sake don't give me ideas as to what to use it for i'll keep it!!

See if it's useful for anyone's machine's for it's actual use. If not it's yours if you want to pay postage. Got to be someone with a CNC mill or whatever it came off which would find it useful.

PekkaNF:
We are here to help members wasting on all their free time on building something after all :lol:

Hope someone needs it as spare, because I would slap it on small servo or stepper, I allready have an indexer and works. I don't have a DRO or CNC, therefore "rotary indexer" would be nice to bolt on milling machine table.

Pekka

Xenocide:
Send me a message on the 20th if nobody's got a use for it Pekka :)

Navigation

[0] Message Index

[#] Next page