The Shop > Electronics & IC Programing
Programming Texas Instruments Microprocessors
catceefer:
I know that there are specialist forums for programming TI microprocessors, but I was wondering whether anyone on this site has any experience? I am trying to code and configure one, but I am struggling to understand some of the basic aspects of configuration. I also find that my questions seem a bit basic for the specialist sites and I do not properly follow the answers. I was hoping that someone on here may be able to help, but with a more simplistic approach.
To be more precise: I have been sent some code which triggers a solenoid once a minute, written in C, along with the set up details for the chip. I can follow the code and configure the chip following the instructions, but I wish to amend the code to add another solenoid, triggered each second. I am happy adapting some of the actual code, but not the aspects that triggers a different port, or configuring the second port.
Any help would be appreciated.
Regards,
James.
John Rudd:
I think we need the chip in question to offer any help.....(I've a bit of experience with pic micros....and my son does C..... Together we sort things.... :zap: )
catceefer:
Thank you.
The chip is a MSP430G2211 and I am using the TI Launchpad, together with their Code Composer and Grace software to code and configure it. I can happily post the code and further details in the body of the post, but I have attached the source document, which is also on this link: http://carveshop.com/clocks/LazyClockElectronics.pdf
Thank you.
James.
modeldozer:
A tutorial on the MSP430 I used,
http://mspsci.blogspot.com.es/2010/07/tutorial-01-getting-started.html
Cheers
Abraham
catceefer:
Abraham,
Thank you for this link. I have found no end of guides, tutorials and other information, but nothing simple or comprehensive enough to be useful to me. This looks ideal and even the first page has been useful. I shall read on............
Regards,
JAmes.
Navigation
[0] Message Index
[#] Next page
Go to full version