| The Breakroom > The Water Cooler |
| Harrogate 2015 |
| << < (3/13) > >> |
| kayzed1:
--- Quote from: John Stevenson on April 26, 2015, 04:50:12 PM ---As I posted on another thread, I'm there all of the three days on the single ARC stand running demo's on the new end mill sharpener. Not sure where the stand will be but guess it's roughly where ARC used to stand by the doors in the long hall. --- End quote --- I could maybe bring along my box of about 60 end mills for you to test that cutter on if you like :thumbup: Lyn. |
| John Stevenson:
Everyone is welcome to bring some but going to have to put a 5-6 ? limit on them so everyone gets a chance. Will be able to do 3mm to 12mm in 2,3 or 4 flute in HSS or Carbide. If you have any with chipped ends then just flat them off on a grinder before you come to save having to repeated grind them back. It doesn't need any end cutting edges left, it can start from a solid if needed. 4 flutes can be the type with a pip in or if they are ground back to get rid of the pip then it will grind them centre cutting. You lads won't be the only ones as there is an article in MEW on the grinder where it's stated that we will be doing cutters at the show. Article here for those that don't take MEW. http://www.stevenson-engineers.co.uk/files/MEW%20article.pdf |
| Manxmodder:
--- Quote from: Stilldrillin on April 26, 2015, 03:13:22 PM ---Mrs Drillin, says yes. :thumbup: So...... It's wot Dave Bluechip says. I think! :scratch: David D --- End quote --- Which bit did she approve of.....you going to the show or being abducted by aliens? :).......OZ. |
| Deko:
Six of us going from Crewe "Men in Sheds" on the Friday. The meeting place for the last few years has been by the big window at the back of the main entrance hall (plenty of room there) at 12 noon, but if anyone else going on Friday wants to use an alternative, that will be fine by us. I will have to sort through my end mills for John to play with. :palm: Cheers Dek. :med: |
| Stilldrillin:
--- Quote from: Manxmodder on April 27, 2015, 06:47:00 AM --- --- Quote from: Stilldrillin on April 26, 2015, 03:13:22 PM ---Mrs Drillin, says yes. :thumbup: So...... It's wot Dave Bluechip says. I think! :scratch: David D --- End quote --- Which bit did she approve of.....you going to the show or being abducted by aliens? :).......OZ. --- End quote --- She doesn't know about the aliens. Or the breeding purposes........ David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |