| Gallery, Projects and General > How do I?? |
| Fixing stone to stone |
| << < (2/2) |
| Stilldrillin:
Some thirty years ago. I fixed several brick sized, silly face tiles, to my concrete garage wall. :palm: Using ordinary silicone sealer. Held in place for a couple of hours, using a clothes prop. They're still fixed solid........... :thumbup: David D |
| ven:
Thanks very much for your advice Ven |
| lordedmond:
Ven Just get some mashed potato that will fix till the end of time , sorry just joking What I would do is to drill the wall for rawlbolts fasted two washers a small one then a fender washer to make a key, do four times , then get a builders adhesive the two pack is best you may have to make up a frame round the plaque to contain and temp fix till set. As you stated its crumbly so you need to get into a sound part Stuart |
| Will_D:
--- Quote from: ven on April 12, 2015, 12:59:04 PM ---It would need to be vandal-proof. --- End quote --- Therein lies the challenge. If a plaque has a visible gap or a line of soft silicon or why. then the b'tards will try to lever it off! |
| Navigation |
| Message Index |
| Previous page |