Gallery, Projects and General > Project Logs |
Bike Timing Sprocket. |
<< < (2/9) > >> |
Zadig:
|
Lykle:
7 Meters! Heavy chunk of steel. Wow. Things are progressing nicely by the look of it. Pretty soon you will hit the tricky parts. Looking forward to that. |
Zadig:
Thanks Lykle, Thankfully, the steel was already cut for a job and came in 700mm lengths. There was some lovely large diameter material there that day, that went through cheap. I had no idea what the spec of the steel I bid for was, it was just one of those pot luck gambles you take from time to time. I was hoping for a good, fairly free machining case hardening steel, but got this instead. Ironically, I have just got through the last bits of a load of 100mm EN24T which was purchased at another auction years ago. I made a set of powered rolls with most of it and will probably do the same with this stuff. As it turns out, this material is ideal for tooling and gears which crop up fairly often. |
Zadig:
|
Zadig:
|
Navigation |
Message Index |
Next page |
Previous page |