Gallery, Projects and General > Project Logs
Bike Timing Sprocket.
<< < (8/9) > >>
vintageandclassicrepairs:
Hi Zadig,
Aha !! Lost in translation  :doh: :doh:
We would refer to these as "magneto" sprockets as opposed to timing sprockets
tomatoe- tomato ???

Yes I have already read all the way through  the restoration thread on the "lighthouse" OK Supreme which of course has timing gears  :scratch:

Regards
John
Manxmodder:
John, I did wonder the same about it being a magneto sprocket when I saw the photos of the taper bore......OZ.
Anzaniste:

--- Quote from: Zadig on April 14, 2015, 01:28:47 AM ---Anzaniste: yes, the code was generated in the software - too easy!

I have a notion to build a full size Anzani three cylinder engine of the type used by Bleriot's cross channel plane - I don't suppose you are an Anzani Guru are you?

--- End quote ---

Guru, no, enthusiast yes :thumbup:

My interest stems from the fact that the engine in my Frazer Nash, illustrated in my avatar, is a 1497cc side valve Anzani. Surprisingly the engine has roller tappets.

I too have a fancy to build a full size of the "W" engine and would be interested to know more about the drawings, can you help Rob?
Zadig:
Have you seen the website:

http://www.pioneeraviator.com

He's made a nice job of a batch of W fan engines. He talks of producing the three cylinder Y too.
The Fan engine certainly has more applications at ground level. If I come across anything I'll keep you informed. Now might be the time to do a little research.

RobWilson:

--- Quote from: Anzaniste on April 16, 2015, 01:54:16 AM ---

I too have a fancy to build a full size of the "W" engine and would be interested to know more about the drawings, can you help Rob?

--- End quote ---


I just have drawings for "Y"  config ,,,,,,,,,,,PM me if your still interested  :thumbup:     ,,,,,,,,,,,mined I am sure I did have some "W"  info some were  :scratch:


Rob 
Navigation
Message Index
Next page
Previous page

Go to full version